- Home
- Equipment
Refine by
Gouda Geo Xprt Equipment & Supplies
89 equipment items found
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Highly accurate optical encoder for the synchronisation of the recorded CPT data with depth. This device generates 10 pulses per cm and counts in 2 directions for optimum synchronisation. Comes complete with mounting bracket. The data vs. depth synchronisation complies with all national and international standards. ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT crawler-truck, either an electrical or mechanical ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. It is designated as being a “basic” rig, since it lacks the electronically controlled hydraulics and remote control which comes with the “professional” 200 kN CPT crawler. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The “economic” 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The only difference with the “basic” 200 kN CPT crawler is the fact, that the working cabin is made of tarpaulin, as where the “basic” crawler features a working cabin made of insulating sandwich panels. The rig has been designed to execute soil mechanical research ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 150 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 110 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
A 200 kN trailer-based CPT penetrometer rig is a lightweight and economical rig with full CPT testing capabilities. It is suitable for both electrical and mechanical CPT testing. It can be towed easily by a 4-wheeldrive car. It comprises a sturdy 2-axle trailer base, a 2-cylinder CPT penetrometer pusher, a diesel-hydraulic power-pack with load-sensing pump, manually operated valves, a work ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN lightweight CPT penetrometer set is an economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT testing. The stand-alone CPT penetrometer pusher set composes of a 200 kN penetrometer pusher featuring 2 hydraulic cylinders with manually operated valves, a diesel-hydraulic power-pack with a Hatz diesel engine and ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Some CPT penetrometer rigs, such as the stand-alone versions, the trailer-based versions and the light-weight CPT crawlers require anchoring to achieve a suitable reaction force to balance the pushing capacity of the rig. Ground anchors are driven into the ground using either a 2 man operated hydraulic wrench in case of a stand-alone or trailer-based penetrometer pusher or the rotary drive of the ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Purpose designed hydraulic wrench for driving ground anchors of the 100 kN and 200 kN stand-alone and trailer-based CPT penetrometer rigs into and out of the ground. To be operated by 2 persons. The hydraulic power for the wrench is supplied by the power-pack of the CPT penetrometer rig. The wrench comes complete with 2 high-pressure hydraulic hoses of 6 meters length and is fitted with ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN stand-alone CPT penetrometer set is a lightweight and economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT testing. The stand-alone CPT penetrometer pusher set composes of a 200 kN penetrometer pusher featuring 2 hydraulic cylinders with manually operated valves and a stainless-steel housing for datalogger and ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN CPT container is a stand-alone unit that can be used in a variety of conditions, both onshore and offshore. It can either be mounted on a truck, a railway lorry or jack-up barge. It contains a hydraulic 200 kN short-stroke CPT pusher and is to be connected to an external ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
An electric CPT measuring head is a calibrated high-precision measuring instrument designed for continuous and/or discontinuous mechanical cone penetration testing. It allows for pushing in CPT sounding tubes with a diameter of 36 mm along with inner rods, and a mechanical CPT cone. The force on the mechanical CPT cone is transferred to the surface by means of the inner rods running through the ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The CPT push-and-pull clamp is purposely designed for automatic pushing and pulling of CPT sounding tubes (Ø = 36 mm) and casing tubes (Ø = 55 mm) during electrical CPT testing ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Pneumatic DPL and DPM testing set is suitable for doing light (10 kg) and medium-heavy (30 kg) dynamic penetration tests according to ISO 22476-2 (replaces DIN ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The sounding rods are used during Dynamic Penetration Testing (DPT) and Standard Penetration Testing (SPT) to hammer the sounding tips into the ground by means of a dynamic penetrometer rig. Gouda-Geo DPT and SPT sounding rods meet the highest quality standards. The rod material is manufactured by one of Europe’s leading steel manufacturers according to our own “Gouda-Geo” ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The window sampling tubes are made of high-quality steel and features multiple windows making visual inspection of the samples easy and straightforward. The cutting shoe (made of hardened steel) is detachable by means of a screw connection enabling the appliance of a core ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The closed soil sampling tubes are made of high-quality steel and designed such, that they can accommodate a transparent PVC liner for holding the soil sample. The inner diameter of the liner is 48 mm, the outer diameter is 50 mm. The cutting shoe is detachable by means of a screw connection enabling the appliance of a core ...